Isolation, purification, and structural characterization of flunixin glucuronide in the urine of greyhound dogs

TC Brady, AJ Kind, WH Hyde, M Favrow… - Drug metabolism and …, 1998 - ASPET
… Solvent A was 0.15 M phosphoric acid/0.05 M TEA in water and solvent B was 0.15 M
phosphoric acid/0.05 M TEA/20% water in acetonitrile. The flow rate was 2.0 ml/min. The detector …

Small Scale Prototype Biomass Drying System for Co-Combustion With Coal

H Roberts, M Favrow, J Coatney… - ASME …, 2013 - asmedigitalcollection.asme.org
… Upon inspection of the inlet velocity values, it was found that the inlet air speed decreased
from 5.0 m/s to 3.6 m/s at both the low and medium heat levels ending up at 2.2 m/s for the …

Three-dimensional mixed-mode fatigue crack growth in a functionally graded titanium alloy

SC Forth, LH Favrow, WD Keat, JA Newman - Engineering fracture …, 2003 - Elsevier
The implementation of unitized structure in the aerospace industry has resulted in complex
geometries and load paths. Hence, structural failure due to three-dimensional mixed-mode …

Experimental and computational investigation of three‐dimensional mixed‐mode fatigue

SC Forth, WD Keat, LH Favrow - Fatigue & Fracture of …, 2002 - Wiley Online Library
Experimental and computational methods were developed to model three‐dimensional (3‐D)
mixed‐mode crack growth under fatigue loading with the objective of evaluating proposed …

Fretting fatigue testing methodology incorporating independent slip and fatigue stress control

LH Favrow, D Werner… - Fretting Fatigue …, 2000 - asmedigitalcollection.asme.org
A fretting fatigue apparatus was designed, built and tested incorporating independent computer
control of fretting fatigue slip distance and fatigue stress. This was accomplished through …

The effects of contact stress and slip distance on fretting fatigue damage in Ti-6Al-4V/17-4PH contacts

DL Anton, MJ Lutian, LH Favrow… - Fretting Fatigue …, 2000 - asmedigitalcollection.asme.org
A comprehensive evaluation of fretting fatigue variables was conducted on shot-peened Ti-6AI-4V
forging material in the~-STOA condition in contact with 17-4PH pins, a material couple …

Three-dimensional fatigue cracking under elastic–plastic deformation

…, L Vestergaard, B Annigeri, L Favrow… - International journal of …, 2001 - Elsevier
… to the contour Γ, T m =σ mk n k is the traction, and u m is the displacement component. As
has … One may compute the cyclic energy release rate ΔJ= ∫ Γ ΔWn 1 −ΔT m ∂Δu m ∂x 1 d s …

Mechanical Properties of Fe-Modified Ll2-Type Al3Ti

HRP Inoue, CV Cooper, LH Favrow, Y Hamada… - MRS Online …, 1990 - Springer
The room temperature ductility of an L1 2 -type Al 3 Ti alloy containing 7.5 at.% Fe has been
improved substantially by hot isostatic pressing (HIP) after arc casting. This L1 2 -type alloy …

Elastic constants of single crystal Hastelloy X at elevated temperatures

HA Canistraro, EH Jordan, S Shixiang, LH Favrow… - 1998 - asmedigitalcollection.asme.org
An acoustic time of flight technique is described in detail for measuring the elastic constants
of cubic single crystals that allows for the constants to be determined at elevated temperature…

Mark L. Renauld, ¹ Jonathan A. Scott, ¹ Leroy H. Favrow,'Michael A. McGaw, 2 Michael D. Marotta, ¹ and David M. Nissley¹

AA Braun, PC McKeighan, AM Nicolson… - … Technology in Fatigue …, 2002 - books.google.com
A novel facility has been developed for elastic-plastic-viscoplastic evaluation of structural
materials through the integration of universal servo-hydraulic actuators connected to a …