User profiles for A Lanzotti
Antonio LanzottiProfessore di Disegno e Metodi dell'Ingegneria Industriale, Universitą degli Studi di Napoli Verified email at unina.it Cited by 3340 |
The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
A Lanzotti, M Grasso, G Staiano… - Rapid Prototyping …, 2015 - emerald.com
Purpose – This study aims to quantify the ultimate tensile strength and the nominal strain at
break (ɛ f ) of printed parts made from polylactic acid (PLA) with a Replicating Rapid …
break (ɛ f ) of printed parts made from polylactic acid (PLA) with a Replicating Rapid …
Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling
Objectives To study the influence of resin based and lithium disilicate materials on the stress
and strain distributions in adhesive class II mesio-occlusal-distal (MOD) restorations using …
and strain distributions in adhesive class II mesio-occlusal-distal (MOD) restorations using …
[HTML][HTML] Influence of framework material and posterior implant angulation in full-arch all-on-4 implant-supported prosthesis stress concentration
This study evaluated the influence of distal implants angulation and framework material in
the stress concentration of an All-on-4 full-arch prosthesis. A full-arch implant-supported …
the stress concentration of an All-on-4 full-arch prosthesis. A full-arch implant-supported …
On the influence of scanning factors on the laser scanner-based 3D inspection process
…, DM Del Giudice, G Staiano, A Lanzotti… - … International Journal of …, 2016 - Springer
3D inspection process is getting more and more interest for manufacturing industries as it
helps to carefully check the expected quality of the released products. Much more attention is …
helps to carefully check the expected quality of the released products. Much more attention is …
CAD-FE modeling and analysis of class II restorations incorporating resin-composite, glass ionomer and glass ceramic materials
Objectives To investigate the influence of specific resin-composite, glass ceramic and glass
ionomer cement (GIC) material combinations in a “multi-layer” technique to replace enamel …
ionomer cement (GIC) material combinations in a “multi-layer” technique to replace enamel …
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
The current research was focused on a further insight into the mechanical properties of 3D
parts printed with virgin and recycled polylactic acid (PLA). A first set of specimens was …
parts printed with virgin and recycled polylactic acid (PLA). A first set of specimens was …
Mechanical behavior of endodontically restored canine teeth: Effects of ferrule, post material and shape
Objective To assess the effect of a ferrule design with specific post material-shape combinations
on the mechanical behavior of post-restored canine teeth. Methods Micro-CT scan …
on the mechanical behavior of post-restored canine teeth. Methods Micro-CT scan …
Adhesive class I restorations in sound molar teeth incorporating combined resin-composite and glass ionomer materials: CAD-FE modeling and analysis
P Ausiello, S Ciaramella, A Di Rienzo, A Lanzotti… - Dental Materials, 2019 - Elsevier
Objectives To investigate the influence of different resin composite and glass ionomer cement
material combinations in a “bi-layer” versus a “single-layer” adhesive technique for class I …
material combinations in a “bi-layer” versus a “single-layer” adhesive technique for class I …
The effects of cavity-margin-angles and bolus stiffness on the mechanical behavior of indirect resin composite class II restorations
Objective To study the influence of the different class II mesio-occlusal-distal (MOD) cavity
shape on the stress and strain distributions in adhesive indirect restorations, using numerical …
shape on the stress and strain distributions in adhesive indirect restorations, using numerical …
Understanding process parameter effects of reprap open-source three-dimensional printers through a design of experiments approach
A Lanzotti, M Martorelli… - Journal of …, 2015 - asmedigitalcollection.asme.org
With a view to enabling additive manufacturing (AM) processes, today, open-source, low-cost
3D printers are systems with great potential. However there is a significant lack of scientific …
3D printers are systems with great potential. However there is a significant lack of scientific …